Wooden shelf

Hand-made furniture has always pleased home craftsmen, especially if this furniture has found active use in everyday life. Not every master is able to make unique furniture, but almost everyone can do such a thing as a bathroom shelf. So first we select a board from which we will make a shelf. The board must be taken necessarily dry and without significant defects. It is desirable that it be smooth and not have transverse, longitudinal or combined deformation. Given the relatively small size of the shelf, it is not difficult to find such a board. Next on the thicknessing machine we adjust the thickness of the boards to 20 mm, although this size can be increased or decreased if desired.
adjusting the thickness of the boards
Next, use a butt saw to butt a board on the blanks we need for the future shelf. end face of the board
In the end we should have two blanks 76 cm long and four blanks 46 mm long.
 Making blanks need to make certain labels
Dimensions are conditional and may vary depending on the intended location where the shelf will be located. The width of the blanks is also chosen arbitrarily, based on their own needs and the presence of a particular board. In this case, the width is 10 cm. Further, on two blanks 76 cm long, you must make certain marks with a pencil in the places where you plan to place the shelves.
it is necessary to make labels
In this case, the distance between the upper and middle shelves is 21 cm (taking into account the thickness of the shelves themselves - 2 cm), the distance of the bottom shelf - 28 see Now we proceed to grinding with a special grinding machine using a grinding wheel with a grain size of not more than 150 units. It is necessary to do this even if you have perfectly sharp knives on the surface gauge, and they do not leave grooves. Next, it is necessary to seal the existing defects with putty on wood (the color of the putty should match the type of wood), wait until it dries,and grind again. Now we proceed to the assembly with furniture screws or wood screws according to the previously noted marks. There should be no difficulties. Furniture screws have a more aesthetic look than wood screws. Although the latter can be filled and thus hide their presence. As a result, we get a ready shelf for the bathroom
 Wooden shelf
It only remains to fix on the back of the fasteners, open this shelf first stain and then varnish. Moreover, the lacquer must be applied in three layers, and after each layer must be polished with fine-grained sandpaper (it is better to do it manually). All shelf is ready!